BP-2

The M.B.C. model BP-2 welding positioner is the "workhorse" of our line.  The BP-2 is a sturdy, smooth running positioner that will handle the loads and heavy demands of production MIG and intricate TIG welding.  The BP-2 positioner handles up to 200 lbs. of balanced load in the horizontal position.

The M.B.C. model BP-2 positioner enables the operator to make any angle the correct DOWNHAND angle for fast, smooth welding of small and intricate assemblies.  Welders can deposit more metal with fewer passes because weld flows more readily and pools evenly.  Welds are more uniform, stronger, and require minimum  finishing.

The front mounted speed control allows convenient, infinite selection of speeds, both forward and reverse, from 0-18 RPM, depending on the positioner model.  The BP-2 features a DC motor with a SCR speed control that is insulated from high frequency interference.

The foot switch provides convenient "on-off" control of the table rotation.  The easy positioning tilt table provides the exact setting for the best welding angle and highest productivity.

The M.B.C. positioner is also handy for chipping, grinding, painting, gluing, and other production operations that require controlled circular movement.

R2

The highlight of the R2 is the 2" diameter thru hole, that allows parts with features 2" diameter and under to be located closer to the turntable.  This eliminates the need for tall fixturing and ensures more precise welds.  Additionally, this design allows for long length work or rear/bottom loading in both the horizontal or vertical position.

The convenient front mounted handwheel provides infinite tilt control between 90 degrees back and 10 degrees forward to fine tune welding angles.  The large sealed roller bearing ensures smooth rotary motion up to the maximum weight capacity.

A rotary purge coupling is available as an option and can be easily installed and removed as necessary.  To further increase productivity the R2 can use the same foot switch and chuck options as our popular BP-2 positioner.

These features and more are available today for our M.B.C. line of positioners that are proudly made in the U.S.A.